Features:

  • MT1080 automatic Flat to Flat automatic die cutting and hot stamping machine is designed for folding boxes and corrugate boxes.
  • It’s fast speed, high precision and large die cutting pressure, precise stamping temperature makes it a good choice for packaging industry.
  • Safe and convenient operation, stable performance, low cost consumables.
  • The machine is PLC and touch screen controlled to make sure of high performance, long lifespan and low maintenance.
  • The machine is highly automatic, from feeding, to die cutting or hot stamping to stacking. There is counter and fault diagnosis on screen.
  • The precise cam assembly ensure the grippers work smoothly and ensure high precision of die cutting or hot stamping in long term.
  • The main drive is adjusted by inverter, low noise and power consumption.
  • The front guide is adjusted by step motor, easy and stable; the stacker joggers are adjusted by reduced motor.
  • The feeder uses 4-suction-five-delivery high speed feeder head, which is good for paperboard and corrugate board. The feeder is controlled separately from the die cutting station.
  • Unique structure of hot stamping system: A) Vertical foil delivery: triple-shaft foil unwinding and rewinding, you can set the parameter and motor running direction from the screen. B) Horizontal foil delivery(Optional): use two servo motors to unwind and deliver foil independently; one servo motor to rewind foil. C) Heating system use twelve separate area under PID mode for precise heating temperature control. The highest temperature can reach 2200c. D) Use industrial computing and motion controller for foil jump functions: certain distance jump, uncertain distance jump and manual setup jump. The first two modes can be set up from screen.

Specifications:

Max. Paper size1080x780mm
Min. Paper size400x370mm
Max. Stamping size1060X750
Max. Die cutting size1070x770mm
Max. Working speed7000S/H
Max. Stamping speed5800S/H
Stamping precision±0.10mm
Voltage380±5%VAC 3 phase
Max. Working pressure350KN
Air compressor≧0.25㎡/min  ≧0.6mpa
Loading height1700mm
Pressure adjustment height2mm
Blade height23.8mm
Material thicknessCard board: 0.1—2mmCorrugate board：< 4mm
Foil delivery mode3-shaft vertical; 2-shaft horizontal
Main motor power11KW
Total power16.7KW(working condition <14KW)
Hot stamping power24KW
Dimension:Main machine: 5800x2070x2150mm
With pre-loading and pedal: 7500x3705x2150mm

Mechanical system:

Gripper chainJWIS, Germany
Drive chainRENOLD, UK
Main bearingsSKF, Switzerland；NSK, Japan
Drive bearingsSF, Korea
Clutch typeLow-voltage pneumatic clutch
Gripper safetyOverload safety(Taiwan) and limit switches
Feeder headHigh speed feeder head, 4-suction-5-delivery
Feeder driveStand alone control
GuideDouble side paper guide, push-pull type
Stacker samplingPneumatic, with air blow system
Feeder and stacker motorReduced motor
PumpZenloon， with temperature regulator
FilterZenloon WLP
Chain lubricationMultiple point auto lubrication
Front guide adjustmentElectric mode
Pressure adjustmentElectric mode
Top lock board4-point air lock
Bottom lock boardDouble side 4-point air lock
Stacker joggerElectric mode
Sample inspectionInspection table with light and monitor
ClutchOMPI, Italy
Pre-loadingGantry pre-loading structure
PedalCovering size with guardrail
Screw and boltTaiwan Eagle #12.9
Air pumpYongdun 80

Electrical system:

Inverter15KW Honeywell
PLCOmron Japan
Touch screenDouble screen in feeder and stacker, Delta
ContactorSchneider, France
SwitchesSchneider, France
RelayIdec Japan
Photoelectric SensorsKEYENCE，Omron etc
BreakerLS(LG)
Proximity sensorOmron，ROKO
EncoderOmron
CableLJX
BallastJBK  800W
Servo for stampingMitsubishi
Controller for stampingTrio UK